Tube bending methods

Bend it like
Theis Tubes

▶ Certified quality, processes that are gentle on materials & a low scrap rate

▶ Over 100 years’ experience and master craftsmanship

▶ An extensive range of tools and a focus on your cost-effectiveness

More details Get in touch now

Facts about us

0% ‘Can’t be done’,
100% innovation
>
1,000
companies in our client base.
60 %
is our export rate.
>
100
years of experience, during which we have continually improved our products.
Zylindrische Halbrohrschlange mit Mitarbeiter des Herstellers im Hintergrund

Types and benefits of tube bending

How can you help me with tube bending?
Tube bending is a technical process for shaping metal tubes so as to permanently form them into a desired geometry. A basic distinction is made between cold forming and hot forming. Whilst cold forming is regarded as particularly gentle on the material and cost-effective, hot forming is now less frequently recommended due to its potential negative impact on material properties. Why should you choose us, of all companies, to bend your tubes? ⬇️

Time-saving

The most economical tube bending method, as it takes significantly less time than welding standard parts

100 % solid

The best weld is no weld at all; this helps to avoid weak points.

Maximum flexibility

Tube bending is not limited to standard dimensions; with the right tools, a wide range of radii and geometries can be produced.

Built for complexity

Modern bending technology makes it possible to reproduce complex tube runs and isometrics with millimetre precision across different planes. This guarantees a perfect fit during final assembly in complex systems.
Mitarbeiter lächelt neben Rohrschlange

Advantages of tube bending: What the expert says

For 100 years, we have worked exclusively with the cold-bending process. Thanks to their keen understanding of the material, our staff achieve a level of precision – even with the most complex geometries – that would be almost impossible to replicate using other methods.

Drawing on our experience and over 1,000 bending tools, we can solve even seemingly impossible tasks cost-effectively and in a material-friendly way.

Tube bending vs. welding

"What are standard parts for, anyway?"

Welding

Much more expensive, as standard parts and welding consumables drive up the material costs
Time-consuming, as each part has to be individually fitted, tacked and welded
Risk of material failure due to exposure to heat, which may impair elasticity
Extensive post-weld treatment (e.g. pickling or grinding) is required
Risk of turbulence or deposits at the junctions of the welded seams
Manual tolerances during assembly often lead to deviations
Increased risk, as every weld is a potential source of leaks

Tube bending

Significantly more cost-effective, as there is no need to buy expensive standard parts
Faster production, as the bend is formed directly from the tube
Preserves the material properties, as no thermal stress alters the microstructure
Optimal media flow thanks to smooth radii with no disruptive edges on the inside
Maximum repeatability thanks to CNC control and software-based planning
High system integrity, as there are no welded joints in the component that could act as potential weak points
Karl Theis Mitarbeiter in der Fertigung lachen miteinander

Tube bending or welding: what the expert says

In practice, we often find that customers underestimatethe enormous testing effort involved in welding: whilst every weld, for example in the chemical or pharmaceutical industries, must be X-rayed and documented individually, we eliminate these thermal weak points from the outset by using cold bending. This not only saves a huge amount of time and money on standard parts, but also guarantees an absolutely unimpeded flow of media thanks to smooth, edge-free radius profiles – which is vital, particularly for our highly sensitive process vessels and cooling coils.

Advice on tube bends and bent components

Stainless steel or exotic
alloys – we make anything
possible.
If you have any questions about our products or the feasibility of specific components, please do not hesitate to contact us at any time.
Karl Theis Mitarbeiterin Judy al Sherfawi
Judy Al Sherfawi

This is what matters when it comes to tube bending.

Attention! A love of detail is a must.
What to bear in mind when bending tubes
  • Stretching and springback: These physical factors must be precisely factored in at the planning stage to ensure that the tube retains the exact desired dimensions once the load is removed.
  • Wall thickness and bending radius: The ratio of these values determines the risk of material defects; particularly with tight radii, creasing or cracking may occur if the work is not carried out professionally.
  • Batch consistency: As material properties such as hardness or tensile strength can vary, tubes from the same batch should ideally be used for a project to guarantee identical bending behaviour.
  • Tool and lubricant quality: The selection of precise bending tools and optimum lubrication are essential for a flawless surface free from damage or deformation.
Zylindrische Rohrschlangen, gebogen von Karl Theis
Dornrohrbiegen mit Maschine

What matters when it comes to tube bending: what the expert says

When it comes to tube bending, we pay attention to both the major and minor factors. For example, to avoid variations in springback, we rely on first-class materials from long-standing partners and complete documentation in the form of inspection certificates 3.1 according to
EN 10204.
Our in-house production planning uses a modern ERP system to precisely control every step of the process, enabling us to guarantee absolute delivery reliability and adherence to deadlines, even for complex custom-made orders. Everything is thought through from A to Z.

Tube bending processes

We know what’s best for you.

Electrically or hydraulically powered machines are usually used for professional tube forming. One of the most important processes is segment bending (rotational bending/compression bending), which stabilises the material through precisely fitted bending tools and the use of so-called crease smoothers and an internal mandrel, thereby enabling extremely tight radii without creasing and with perfect roundness of the tube bend.
There are also the following options ⬇️

  • Three-roller bending or free-form bending, in which the tube is slowly rolled into a curve between three rollers. This is primarily used for large radii; it also allows smooth radius transitions.
  • Special bending processes, which are developed by our experts and specialists specifically for your bending requirements and brought to series production readiness.
Mitartbeiter biegt ein gerades Halbrohr, der Prozess des Rohrbiegens ist von vorne bis hinten geplant und durchdacht.
Zeigt Messung nach Verfahren des Rohrbiegens für eine zylindrische Rohrschlange

These are the tube bending methods we use most frequently: here’s what the expert has to say

At Karl Theis, in addition to our CNC-controlled 3-roller bending machines, we rely on highly specialised custom-built bending machines developed in-house to ensure we always find the best solution, even for unusual profiles such as oval or hollow tubes. Drawing on our specialist knowledge and many years’ experience, we determine whether a conventional or CNC-controlled process offers the most cost-effective solution, enabling us to reliably carry out even the most challenging tasks.

Tube bending: Common materials

Made Out of Pure Power

Tube bending primarily involves the use of metallic materials that possess sufficient elasticity for cold forming. The choice of material depends heavily on the intended application, such as corrosion resistance in the pharmaceutical industry or compressive strength in plant engineering. Stainless steel and steel tubes in various grades, in particular, set the standard in professional fabrication due to their reliability.

Common materials*
Material group Examples (material numbers / grades) Typical dimension range (outer Ø x wall thickness)
Stainless steel 1.4301, 1.4541, 1.4571, 1.4404, 6 – 114.3 mm x 0.8 – 10 mm,
Steel P235GH, P265GH, P355NH, 16Mo3, 6 – 114.3 mm x 0.8 – 10 mm
Copper According to DIN EN 1057 (various hardness grades), Project-specific (e.g. Ø 6 – 25 mm for radii)
Special materials Alloy materials, aluminium, profiles, On request (e.g. sheet metal strips 48 – 212.5 mm),
*Not right for you? We’ll find another solution for you.
Mitarbeiter von Karl Theis beim Rohrbiegen

Common materials: What the expert says

We source our materials exclusively from certified partners and, in the case of stainless steel and steel, pay meticulous attention to dual certification in accordance with ASTM/ASME in order to exceed international safety standards. Through our complete document management, we ensure that every
component is supplied with an inspection certificate 3.1 according to EN 10204, which guarantees our customers absolute traceability and quality.

Wherever possible, we also prioritise regional supply chains to keep transport distances short and to take responsibility throughout the entire supply chain.

Test procedures for tube bending

Quality at its best.

To ensure the safety and quality of bent tube systems, various destructive and non-destructive testing methods are used.

Common non-destructive methods include radiography (RT), magnetic particle testing (MT) and penetrant testing (PT), which are used to identify surface defects or cracks without damaging the component.

Ultrasonic testing is also used to carry out precise dimensional checks, whilst endoscopes provide a detailed view of the interior of the tubes. In addition, destructive tests such as tensile tests or hardness tests provide information about the material’s mechanical strength following forming.

Nachmessen nach Rohrbiegen mit Wasserwaage
Nach Rohrbiegen: Prüfung durch Mitarbeiter manuell

Testing procedures for tube bending: What the expert says

At Karl Theis, we go beyond standard inspections and have highly qualified in-house staff, including Level 3 inspection supervisors for dye penetrant testing. Should highly specialised requirements such as corrosion tests or residual stress analyses be required, we coordinate these through a tried-and-tested network of accredited laboratories to ensure comprehensive documentation for every project.

Sectors that regularly have tubes bent by us

Made to benefit

With precision and expertise, even the most complex planning becomes a safe and straightforward process – as has been the case, for example, in the following sectors:

Chemicals & petrochemicals

For heating and cooling process vessels

Pharmaceutical industry

Used in production facilities for precise temperature control

Food industry

Use in food processing plants

Transport & logistics

From rail tank wagons to heated road tankers

Plant, tank & machinery construction

As a general structural component in mechanical engineering and traditional plant engineering

As a multi-generational family business,
we care deeply about future generations

Energy-efficient production

Systematic analysis of energy consumption and emissions

Consistent waste sorting – in both production and the office

We don’t bend the truth.
Are you looking for honest, transparent advice?
Please feel free to get in touch with us at any time. We are here to support you with our decades of expertise and creative problem-solving.
Porträt von unserer langjährigen Mitarbeiterin Francesca Wünsch (Vertrieb)